Deep groove ball bearings have a simple design with non-split inner ring and outer ring. They are suitable for high and very high speeds. They accommodate radial loads and certain axial loads. 85% of bearings used in industrial applications are deep groove ball bearings. They are commonly used in transport vehicles, electric motors, textile machinery and other general machinery.

Self-aligning ball bearings have two row balls and sphered raceway on outer raceway. They can accommodate radial loads and small axial loads. They are mainly used for the applications with varying shaft deflection or misalignment like textile and paper machinery shafts.

Angular contact ball bearings' inner and outer ring raceways can displace relatively on the horizontal axis in order to accommodate combined loads (axial& radial). Axial load carrying capacity of these bearings increase when the ball contact angle increases. They are generally used in high speed, high precision applications such as; spindle motors, electric motors, pumps, turbines, air compressors, etc.

Thrust ball bearings include shaft& housing washers,steel balls and cage. Their design is for only carrying axial loads. They are not suitable for the radial loads. These bearings are generally used in steering systems for automotive, lifting jacks,marine and other machinery shafts under axial loads.

Tapered roller bearings have cups and  cones. They can accommodate combined loads both axial&radial. These bearings axial load carrying capacity varies according to contact angle (Bigger angle= Bigger Load capacity). They are mainly used in wheels, differentials, gearboxes, spindles, off-road machines, and railway vehicles.

Spherical roller bearings have two row rollers and sphered raceway on outer raceway. They can accommodate heavy radial loads and heavy axial loads. They are mainly used for the applications where varying heavy loads or misalignment are present. They are commonly used in paper mills, rolling mills, mining and construction machines, railway vehicles, presses, and vibrating screens.

Cylindrical roller bearings are the right choice for  high speeds and heavy radial loads. They are produced in different inner ring desings for easy dismounting (NU,NJ,NUP,N, etc.). They are mainly used in gearboxes, pumps, compressors, spindles, large size motors, heavy industrial machines and vehicles, etc.

Needle roller bearings have thin section cylindrical rollers. They are usually prefered for high load carrying capacity in a limited radial space like compressors and textile machines.

Spherical plain bearings are self-aligning without any rolling elements. They are suitable for joint movements at low speeds. If it is needed, they can be supplied as maintenance-free.

Ball bearing units have a precision wide inner ring bearing assembled into a housing. Housings can be made of cast iron, pressed steel,thermo plastic or composites. Units are prelubricated and are designed to slip fit on to the shaft. Locking method is either set screw locking, eccentric self-locking or concentric. They can be supplied according to different needs; load requirements, shaft sizes and dimensional requirements, anti-corrosive. 

Adapter sleeves are used for locating bearings with a tapered bore onto a cylindrical seat as they can be used on plain or stepped shafts.

• Toothless four point contact ball slewing bearing
• Outer-tooth four point contact ball slewing bearing
• Inner-tooth four point contact ball slewing bearing
• Toothless double row angular contact ball slewing bearing
• Outer-tooth double row angular contact ball slewing bearing
• Inner-tooth double row angular contact ball slewing bearing
• Toothless single row cross roller slewing bearing
• Outer-tooth cross roller slewing bearing
• Inner-tooth cross roller slewing bearing

• Wheel bearings
• Wheel hub units
• Clutch release bearings
• Gearbox bearings
• Heavy goods vehicle bearings
• Water pump bearings
• Wheel Bearing kits
• Suspension strut bearings

• Radial shaft seals
• Wear sleeves
• V-ring seals
• O-rings and back up rings
• Cassette seals
• Metal face seals
• Piston seals
• Rod and buffer seals
• Wiper seals
• Guide rings and strips
• Special large-size seals

• Standard mechanical seals
• Special pump seals
• Cartridge seals
• Metal below seals
• Dry gas seals
• Mixer and agitator seals
• Desulfurization pump seals
• Slurry pump seals
• Turbine mechanical seals
• Compressor seals